Models
>
79641262610
79641262610 Kenmore Washer - Overview
Sections of the 79641262610
[Viewing 3 of 3]Keep searches simple, eg. "belt" or "pump".
Washing Machine Drain Pump
PartSelect #: PS3579318
Manufacturer #: 4681EA2001T
The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after...
$156.41
In Stock
Water Inlet Valve - Cold
PartSelect #: PS11728995
Manufacturer #: 5220FR2075L
This valve is used for cold water, bleach dispenser and prewash cycles. It has a standard hose fitting inlet with 2 outlets facing 45 degrees to the right and one outlet facing 45 degrees to the left.
$135.21
In Stock
Magnetic Door Plunger
PartSelect #: PS3618292
Manufacturer #: AGM73610701
This magnetic door plunger, also known as the magnet holder, is built for your washer. When you order this part, you will receive the plastic housing and a spring that goes with it. The magnetic door ...
$76.35
In Stock
Washer Hose with Bellows
PartSelect #: PS3523347
Manufacturer #: 4738ER1004B
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose conne...
$62.02
In Stock
Door Boot Seal
PartSelect #: PS3535210
Manufacturer #: MDS47123602
This door boot is for washers.
Door boot forms a seal between the wash tub and the door, preventing leaks.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
$228.40
In Stock
Tub-to-Pump Drain Hose
PartSelect #: PS3523345
Manufacturer #: 4738ER1002A
This hose has bellows to allow for flexibility during the wash and spin cycles.
$53.13
In Stock
Detergent Dispenser
PartSelect #: PS3522644
Manufacturer #: 3891ER2003A
This is a replacement detergent dispenser for your washer. It stores the detergent, and then dispenses it into the washer at the appropriate point in the wash cycle. If the detergent dispenser is brok...
$35.82
In Stock
Gasket
PartSelect #: PS3535219
Manufacturer #: MDS62058301
This part is the replacement rear tub gasket for your washer. It is made of black plastic and is approximately 3-1/4 inches in diameter. The rear tub gasket forms a watertight seal between the rear tu...
$39.12
In Stock
Questions And Answers for 79641262610
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roberto
March 10, 2020
The washer do not let me select any cycle but "casual" it works fine in casual. If you want to select any other cycle you wont be able to do it.
For model number 79641262610
Hello, Thank you for your question. You will want to check into the Control board- Part #: PS12080435. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Donette
July 13, 2021
Knocking noise in washer. Bearings and shocks have been replaced for a different reason. All was good for 3 weeks, now this knocking sound when tub is spun manually or in the regular cycle. Knocks whether there are clothes in the tub or not.Is it possible the rotor assembly or stator are causing this noise. i do have a video of the noise if you need to hear.
For model number 79641262610
Hi Donette,
Thank you for your question. If your washer is making a knocking sound and you have already replaced the bearings and the shocks, there are some other parts that you will need to check to see which one is causing the issue. You will need to check the rotor, stator and the pump. We hope this helps! Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Alfred
May 25, 2022
Kenmore front load washer timer will not advance. After along while (20 minutes) code oe comes on. I have already replaced water drain pump, no help. Timer control board?Thanks for the help,
al
For model number 79641262610
Hi Alfred,
Thank you for your question. The OE error code indicates that the washer has not drained for 10 minutes. If you have replaced the drain pump and the code still appears, the issue is likely a clogged filter or coin trap and you will need clean it. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jorge
October 14, 2022
Door latch broke off. Do you have that part?
For model number 79641262610
Hi Jorge,
Thank you for your question. If you are referring to the locker hook, the part number listed under your model number for it is PS8752721. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Raul
October 31, 2022
How common is the failure of the rotor or stator? Do you replace both or one? The drum does not spin but the door is locking and I can hear the stator making noise but the drum does not turn. Any help is appreciated.
Thanks
For model number 79641262610
Hello Raul, thank you for contacting us. The rotor failure problem is a commonly reported issue because its windings are susceptible to burns. We would recommend checking the drain system and making sure the drain pump is good. If drainage is good, replacing the rotor, part number PS3532774, is the most probable solution. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- 3
- Next >
Common Symptoms of the 79641262610
[Viewing 10 of 10]Will not drain
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
these parts
Show All
Draining Issues
Fixed by
these parts
these parts
Show All
Water Filling Issues
Fixed by
these parts
these parts
Show All
Engine runs but does not pump water
Fixed by
these parts
these parts
Show All
No hot or cold water
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Washing maching wouldn't drain
Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer came apart quickly just moving down the front of the washer and removing the door, latch, tub gasket, drain cover. Removing the pump was just a mater of disconnecting the drain hoses, and one clip under the drain assembly. 3 screws attach the drain to assembly to the pump and only 2 wires that are clearly marked. Reassembly is just going back through in reverse order of disassenbly. The best thing about this is that it all comes apart with a standard phillips screwdriver.
Parts Used:
-
Jorge from Apple Valley, CA
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
559 of 713 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not close
There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replace the magnet was $18. Instructions were included in the box. Part number on the drawing was A165. PS3618292 Magnetic Door Plunger
Parts Used:
-
Omnitech from Warrenville, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
154 of 170 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
noisy operation, sometimes did not drain, gave OE code
Thank you for the very helpful YouTube video. After watching the video, I was able to diagnose the problem, buy the part from your website, and complete the repair. This is my personal machine - I am not a professional repairman.
Parts Used:
-
Michael from RALEIGH, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
47 of 62 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!