Models
>
91133389100
91133389100 Kenmore Cooktop - Overview
Sections of the 91133389100
[Viewing 3 of 3]Manuals & Care Guides for 91133389100
Click to downloadKeep searches simple, eg. "belt" or "pump".
![Surface Burner Spark Electrode – Part Number: WB13K18 Surface Burner Spark Electrode – Part Number: WB13K18](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/231276-1-S-GE-WB13K18-Surface-Burner-Spark-Electrode.jpg)
Surface Burner Spark Electrode
PartSelect #: PS231276
Manufacturer #: WB13K18
This part helps your burner ignite and produce flame.
$51.84
Special Order
![Burner Bowl Seal – Part Number: WB32M10 Burner Bowl Seal – Part Number: WB32M10](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/244599-1-S-GE-WB32M10-Burner-Bowl-Seal.jpg)
Burner Bowl Seal
PartSelect #: PS244599
Manufacturer #: WB32M10
This gasket goes under the burner bowl to help protect the glass from high heat. Sold individually.
No Longer Available
![Gas Pressure Regulator – Part Number: WB19T10078 Gas Pressure Regulator – Part Number: WB19T10078](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/2337785-1-S-GE-WB19T10078-Gas-Pressure-Regulator.jpg)
Gas Pressure Regulator
PartSelect #: PS2337785
Manufacturer #: WB19T10078
This comes set from the manufacturer for Natural Gas. It also includes the conversion to Liquid Propane.
This valve automatically cuts off the flow of gas at a certain pressure.
$87.32
Special Order
![Burner Bowl Seal – Part Number: WB32M8 Burner Bowl Seal – Part Number: WB32M8](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/244608-1-S-GE-WB32M8-Burner-Bowl-Seal.jpg)
Burner Bowl Seal
PartSelect #: PS244608
Manufacturer #: WB32M8
This part is the replacement burner bowl seal or drip pan seal for your range. It is black in color and is sold individually. The burner bowl seal creates a seal between the cooktop and the drip pan a...
$34.59
Special Order
![Burner Grate – Part Number: WB31T10007 Burner Grate – Part Number: WB31T10007](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/244391-1-S-GE-WB31T10007-Burner-Grate.jpg)
Burner Grate
PartSelect #: PS244391
Manufacturer #: WB31T10007
Sold Individually.
$153.72
Special Order
![Screws - Package of 12 – Part Number: WB1X500D Screws - Package of 12 – Part Number: WB1X500D](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/234746-1-S-GE-WB1X500D-Screws-Package-of-12.jpg)
Screws - Package of 12
PartSelect #: PS234746
Manufacturer #: WB1X500D
These are replacement screws designed to fit your range. They are made of metal and are approximately ¼ inch long. They come in a package of 12. These are OEM parts sourced directly from the manufacturer.
$12.80
Special Order
![Single Liquid Propane Orifice Spud - Medium Burner – Part Number: WB28K145 Single Liquid Propane Orifice Spud - Medium Burner – Part Number: WB28K145](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/240769-1-S-GE-WB28K145-Single-Liquid-Propane-Orifice-Spud-Medium-Burner.jpg)
Single Liquid Propane Orifice Spud - Medium Burner
PartSelect #: PS240769
Manufacturer #: WB28K145
Sold Individually. Order quantity needed.
$20.17
Special Order
![Liquid Propane Orifice Spud – Part Number: WB28K5087 Liquid Propane Orifice Spud – Part Number: WB28K5087](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/240918-1-S-GE-WB28K5087-Liquid-Propane-Orifice-Spud.jpg)
Liquid Propane Orifice Spud
PartSelect #: PS240918
Manufacturer #: WB28K5087
This orifice spud changes the burner from natural gas, to liquid propane. This orifice is sold individually.
No Longer Available
Questions And Answers for 91133389100
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the 91133389100
[Viewing 2 of 2]Will Not Start
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/231276_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/12742738_1_s.jpg)
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/953099_1_s.jpg)
Show All
Gas igniter glows, but will not light
Fixed by
these parts
these parts
![Fixing](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/assets/PartImages/231276_1_s.jpg)
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Burner igniter needed to be replaced
Assumed the entire top of the range would have to be lifted off. Removed the three screws inside the top of the over door and then noticed the two screws holding the dish around the burner. They were tight and required WD-40 and then a sharp tap and came off.
Important: Notice the direction your old igniter is plugged into the wire. It is not clear and can go on either way.
Important: Notice the direction your old igniter is plugged into the wire. It is not clear and can go on either way.
Parts Used:
-
Thomas from Bloomsbury, NJ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
37 of 63 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No spark to ignite the gas.
First I shut off the gas valve below the range and unplugged the unit from the electrical outlet. I left the flexible gas line fitting undisturbed/attached to the range top gas fitting. Then I removed the two screws below the unit (under the counter) that affix the range to the counter/support structure. Then I removed all of the knobs and burner grills and gas diffusers sitting on the top of the range. Then I lifted out the burner bowls and disconnected each from their respective spark wires. Then I gently pried the range from its hole in the counter being carefulm not to break the glass top and lifted it out turned it at an angle to the counter top hole and set it back down on the counter. Then I gently pried off the glass top from the metal range base, cleaned it thoroughly and set it aside. Then, I placed the new spark module next to the old one and one by one I transferred each wire to its respective location on the new module. The instructions pointed out that the new spark module has a revised grounding scheme and that a ground wire is no longer needed, so I removed and discarded the green ground wire. I then affixed the new spark module into the location where the old spark module had been. Next I replaced the wiring harness which contains the switches for each burner location. It is important to replace the wiring harness along with the spark module as they must work together reliably to complete the gas ignition circuit. The old wiring harness simply lifts/unsnaps out and the new one snaps into its place. Once both the spark module and wiring harness were in place, reassembly of the range was simply the reverse of disassembly.
Parts Used:
-
William from Littleton, CO
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
24 of 32 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My wife wanted different color stove top grate & burner caps.
Called GE for part number crossover from gray to black and asked for an email quote. Called Parts Select for pricing, which was alot lower! Shipping took five days and less then $8.00 buck....now mama's happy!!!! Thanks for great frendly service from Mike in California.
Parts Used:
-
Michael from Bakersfield, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!