Models
>
AED4475TQ1
AED4475TQ1 Admiral Dryer - Overview
Sections of the AED4475TQ1
[Viewing 3 of 3]Keep searches simple, eg. "belt" or "pump".
Multi Rib Belt - 92-1/4"
PartSelect #: PS346995
Manufacturer #: 341241
This dryer drum belt has four ridges, three grooves and is 1/4" wide.
$21.85
In Stock
Thermal Cut-Off Kit
PartSelect #: PS334299
Manufacturer #: 279816
This thermal cut-off kit for a dryer includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires.
$49.66
In Stock
Roller Support Tri-Ring
PartSelect #: PS11755850
Manufacturer #: WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.06
In Stock
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.18
In Stock
Dryer High Limit Thermostat
PartSelect #: PS11742185
Manufacturer #: WP3977767
This high-limit thermostat with Terminal Extension Arm acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit, this piece will shu...
$29.89
In Stock
Drive Motor with Pulley
PartSelect #: PS334304
Manufacturer #: 279827
This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.
$158.44
In Stock
Rear Drum Felt Seal
PartSelect #: PS8691753
Manufacturer #: W10612022
This seals Includes adhesive. This part helps seal the drum to prevent hot air from escaping.
$82.23
In Stock
Dryer Blower wheel
PartSelect #: PS11743785
Manufacturer #: WP694089
The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.
$46.57
In Stock
Heating Element Connection Wire Kit
PartSelect #: PS334206
Manufacturer #: 279457
This kit is used for electric clothes dryers, and it comes with a yellow wire nut.
$14.06
In Stock
Questions And Answers for AED4475TQ1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank Riha
January 9, 2020
Dryer heats sometimes at high heat setting but doesn't work on other settings. Turn the knob a few times and it may heat. All thermostats were changed so i think it is the timer.Is this very common?
For model number AED4475TQ1
Hello Frank, thank you for your question. Yes, if the unit is not heating all the time, the issue could be with the timer. If the element was tested, and the thermostats were replaced the timer would be the next part we would recommend replacing. I hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Sherri
December 31, 2019
My dryer started not shutting off when the door was opened and now will not start.
For model number AED4475TQ1
Hello Sherri,
Thank you for your question. Our sources suggest replacing the dryer door switch for your model under part PS11741701 to fix the issues with the dryer. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Steven
March 7, 2020
My dryer is not drying clothes well it heats but not real hot could this be a element
For model number AED4475TQ1
Hello Steven,
Thank you for your question. Our sources suggest it is likely the thermal-cut off kit under part PS334299 for your model that would need to be replaced to fix the issues. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Michelle
March 21, 2020
Hi, i put on the thermal cutoff kit #279816 now my dryer wont start
For model number AED4475TQ1
Hello Michelle,
Thank you for your question. Our sources suggest replacing the dryer door switch under part PS11741701 for your model to fix the dryer issues. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Dwight
May 3, 2024
What is the capacity ie. cubic feet?
For model number AED4475TQ1
Hi Dwight, thank you for the question. Your model is of 6.5 cubic feet. Glad to be of help!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Common Symptoms of the AED4475TQ1
[Viewing 13 of 13]Noisy
Fixed by
these parts
these parts
Show All
Too hot
Fixed by
these parts
these parts
Show All
Drum Not Spinning
Fixed by
these parts
these parts
Show All
Not Heating
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Won’t Start
Fixed by
these parts
these parts
Show All
Heat stays on after drum has stopped
Fixed by
these parts
these parts
Show All
Running With Door Open
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Door Pops Open
Fixed by
these parts
these parts
Show All
Light not working
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
door switch was bad
i was able to go on line with your company , find my dryer, order the part and had it the next day. fast , great , service
Parts Used:
-
pat from lisbon,, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench set
1019 of 1065 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back off.
Parts Used:
-
Vernon from Niceville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
886 of 949 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer Would Not Turn Off With Door Open
Pryed dryer top open and opened front door. . Unscrewed the 2 retaining screws. Pulled old switch from the wiring harness. Put new switch in place and replaced the retaining screws. Put new switch wire plug into the wiring harness. Before closing top, checked door switch function with dryer on. Dryer cut off when door open and when closed dryer started normally. . . Maint. Note instruction book should warn that letting door slam, which I did on occaision, broke the switch arm. Might save future problems.
Parts Used:
-
RICHARD from NORCROSS, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
566 of 581 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!