Models
>
GTH18GBDERWW
GTH18GBDERWW General Electric Refrigerator - Overview
Sections of the GTH18GBDERWW
[Viewing 3 of 3]Manuals & Care Guides for GTH18GBDERWW
Click to downloadInstall
Installation Instructions
(0.09MB)
Manual
Owner's Manuals
(11.25MB)
Manual
Owner's Manuals
(10.63MB)
Keep searches simple, eg. "belt" or "pump".
Vegetable Drawer Shelf Frame
PartSelect #: PS964313
Manufacturer #: WR17X11662
Frame only. Glass NOT included.
$150.95
Special Order
Door Shelf Bar
PartSelect #: PS964507
Manufacturer #: WR17X11889
This shelf is designed to fit a refrigerator. It connects to the refrigerator door, and is used to hold food and beverage items. It is made of white plastic and is approximately 24 inches wide. The do...
$74.14
Special Order
Evaporator Fan Motor
PartSelect #: PS12741350
Manufacturer #: WR60X31522
This evaporator fan motor is located in the back of the freezer and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
No Longer Available
Evaporator Fan Grommet - Red
PartSelect #: PS963756
Manufacturer #: WR02X12008
This evaporator fan grommet is red in color, and is about 1 inch in diameter.
$16.79
Special Order
Evaporator/Condensor Fan Grommet
PartSelect #: PS284555
Manufacturer #: WR02X10098
This evaporator fan motor grommet, or condenser fan grommet is built for refrigerators. It provides a cushion between the fan motor and the motor mounting bracket. It is made or round, black plastic a...
$14.73
Special Order
Light Bulb - 40W
PartSelect #: PS217532
Manufacturer #: 40A15
This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible wi...
$5.85
Special Order
Refrigerator Freezer Door Handle Kit - White
PartSelect #: PS9864030
Manufacturer #: WR12X22148
$150.95
Special Order
Door Shelf Bar
PartSelect #: PS1015918
Manufacturer #: WR17X11890
This part is the door fixed shelf, also known as the door shelf bar, and it is built for your refrigerator. It allows food and beverages items to stay in the door shelf. It is made of white plastic. I...
$56.04
Special Order
Evaporator Fan Blade
PartSelect #: PS1018129
Manufacturer #: WR60X10204
This blade attaches to the evaporator motor.
$21.69
Special Order
Defrost Timer - 120V 60Hz
PartSelect #: PS310869
Manufacturer #: WR9X502
This defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, and the label is orange.
$118.59
Special Order
Questions And Answers for GTH18GBDERWW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chaundrea
November 22, 2022
The lower of the refrigerator is not cooling the fan on the back spins on occasion which part is needed to replace I have changed the motor to the freezer and everything works fine now it’s just the bottom is not cold it’s cool
For model number GTH18GBDERWW
Hello Chaundrea, thank you for contacting us. Given that the evaporator fan motor, part number PS12741350, is good, we would suggest inspecting the evaporator coils and ensuring that they have no built-up ice. If you notice ice build-up, the defrost timer, part number PS310869, is most likely defective. We would also recommend testing the capacitor, part number PS11764031, and temperature control, part number PS9493106. Please reach out to customer service if you need help placing an order. Glad to be of help!
Was this helpful?
Thank you for voting!
Related Parts:
Byron
September 30, 2023
Hi
I'm needing a new kick plate for the fridge.
Can you please help me out with getting one ?
I've been unable to find one.
The dogs long hair gets under the fridge and it stops cooling,
said the repair man.
We just lost a bunch of my wife's insulin due to not being correctly refrigerated.
Thanks
For model number GTH18GBDERWW
Hello Byron, thank you for your inquiry. Your model does not have a kick plate. The problem occurs if the pet hair becomes so dense that it clogs up the refrigerator's condenser coils. When this happens, the fridge stops cooling the way it was designed to. Fortunately, you can use a vacuum cleaner with a thin attachment to get into most hard-to-reach places, including around the fridge. The condenser assembly for your model is part number PS309555. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the GTH18GBDERWW
[Viewing 16 of 16]Noisy
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Light not working
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Freezer section too warm
Fixed by
these parts
these parts
Show All
Fridge too cold
Fixed by
these parts
these parts
Show All
Freezer not defrosting
Fixed by
these parts
these parts
Show All
Clicking sound
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Fridge runs too long
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Door Sweating
Fixed by
these parts
these parts
Show All
Too warm
Fixed by
these parts
these parts
Show All
Frost buildup
Fixed by
these parts
these parts
Show All
Freezer too cold
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Freezer Fan
I removed two srews from the back panel inside fthe reezer compartment and the two that hold the air manifold/baffle? and pulled the baffle out. Then, I removed the two srews that hold the front part of the fan bracket behind the baffle and the back panel came out easily. Two more screws and one quick connect plug attached to the fan and I was done with removal. Insallation was even quicker, I slid the original fan right off the old motor and slid it on the new motor's shaft. Piece of cake! Thanks Partselect.
Parts Used:
-
Luis from College Station, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
255 of 279 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
evaporator fan making lots of noise
the repair was really easy!!! took longer to put the little clip on the fan part than it was to install the whole moter and put everthing back together
save money do it yourself.....
save money do it yourself.....
Parts Used:
-
alex from rohnert park, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable)
120 of 143 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sticking Light Switch
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the switch could be pulled out further each time the catch clip was depressed to the next detent. Then I used the screw driver on the left site to encourage the switch past the detents on the left and very quickly the switch was out of the mount. The wires from the refrigerator pulled out with the old switch. I unplugged the old switch from the wires and plugged in the new switch and shoved the new switch back into the mount, wiggled it a couple of times to make sure it was secure and the job was done. Once I applied the vise gripes at first, the whole job took less than a minute.
Parts Used:
-
Jonathan from Lilburn, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
117 of 147 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!