Models
>
JES9800AAB
JES9800AAB Jenn-Air Range - Overview
Sections of the JES9800AAB
[Viewing 6 of 6]Manuals & Care Guides for JES9800AAB
Click to downloadKeep searches simple, eg. "belt" or "pump".
Grease Filter
PartSelect #: PS11743870
Manufacturer #: WP71002111
The filter is made of metal and is intended for use with ranges and cooktops. As per the manufacturer, this filter may be 1/2" slimmer than the original, but will still function the same.
$39.01
In Stock
Bake Element
PartSelect #: PS11744404
Manufacturer #: WP74010750
This bake element has push-on terminal ends.
NOTE: This element has been updated by the manufacturer. New installation screws are required. Screws are sold separately.
$48.04
In Stock
Long Oven Sensor
PartSelect #: PS1570174
Manufacturer #: 12001656
This oven sensor kit comes with two harness adapters. This sensor detects the temperature within the oven cavity.
$47.67
In Stock
Element with Limiter 6 Inch - 1200W
PartSelect #: PS11764915
Manufacturer #: W10823711
Sold individually. This is a radiant surface element with a limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stovetop.
$280.06
In Stock
LEVELER-FOOT,SCREW,F/S,NYLON
PartSelect #: PS16875974
Manufacturer #: W11665456
This leveling leg is two inches long. It is all black in color and it is made entirely of plastic.
$26.92
In Stock
Bi-Pin Halogen Bulb
PartSelect #: PS11744355
Manufacturer #: WP74009925
This part is a replacement halogen lamp for your oven. The bulb is 25 watts and 120 volts. If your light bulb is burned out, this is the part that replaces it. Be sure to turn off power to your range ...
$32.75
In Stock
Door Gasket
PartSelect #: PS11749287
Manufacturer #: WPW10162384
This oven door gasket comes with built in retaining clips.
$110.88
In Stock
Screw
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.43
In Stock
Dual Radiant Element with Limiter
PartSelect #: PS11759488
Manufacturer #: W10823709
$286.28
In Stock
Dual Surface Burner Switch Kit
PartSelect #: PS2003583
Manufacturer #: 12002125
This switch is used to operate the dual surface burner.
$113.17
In Stock
Questions And Answers for JES9800AAB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Luke
November 15, 2022
The display shows both elements turned on during baking cycle warmup, but the broil element never glows like the baking element. The broil element works fine during broil cycle. Should both elements be on during baking?
For model number JES9800AAB
Hi Luke, thank you for contacting us. Generally, the bake settings use only the lower element. Preheat setting turns on both elements, it is the setting to use for recipes requiring a cold start in the oven. After the warmup, the oven switches to the bake element and maintains the temperature with only the lower element. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
July 12, 2023
Control panel alarms and scrolls F1-1 call authorized dealer when appliance is not in use
For model number JES9800AAB
Hello Joe, thank you for contacting us. The F1-1 error code means that your oven thinks your lower oven sensor is shorted. Power unit down by turning off the circuit breaker(s) for one minute. Power unit up by turning on the circuit breaker(s). Monitor the oven for one minute to ensure the error code does not display again. Verify oven operation. If it does not solve the problem, we recommend replacing the temperature sensor, part number PS1570174. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Ardner
March 18, 2022
What is the difference between the AAW and AAB model? I need an ignition switch for my JES9800AAW range.
For model number JES9800AAB
Hello Ardner, thank you for your question. JES9800AAW is a white unit. JES9800AAB is a black unit. The switches for both models would be the same. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Joe
20 days ago
I need the two phase burner looking at the stove the right front
The center works but the outside ring doesn't
Any suggestions
For model number JES9800AAB
Hello Joe, thank you for reaching out. Before replacing the surface burner, we would suggest checking the infinite switch, part number PS2003583, to fix the issue. It turns the surface element on and off and controls how much heat the element produces. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
Patty
February 29, 2024
heat element not getting up to temp. on regular bake. convection roast does
For model number JES9800AAB
Hello Patty, thank you for contacting us. Based on the description that you have provided, we would recommend checking the bake element, part number PS11744404, to solve the problem. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- Next >
Common Symptoms of the JES9800AAB
[Viewing 10 of 10]Element will not heat
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Will not program
Fixed by
these parts
these parts
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replace Grease Filter
Just a couple of minutes to left off the cover grid, left out the old filter and drop in the new one.
Parts Used:
-
Gene from Washington C.H., OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
525 of 539 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The element broke in two pieces after food dried on it.
First, I unplugged the oven. Then, I removed the two screws that hold the element in place. After that, I gently pulled the element toward the front of the oven until the wires were exposed. I disconnected the wires from the old element, removed the old element and then attached the wires to the new baking element. I gently pushed the new element back into the screw holes and screwed the new element in place. When I plugged the oven back into the wall I heard a pop and thought I'd blown up the oven! Turns out the breaker popped...after fixing the breaker, I turned the oven on and the element worked just fine. I highly recommend PartSelect.com for their fast shipping and great products. I will be ordering from them again for future appliance parts.
Parts Used:
-
Heather from Huntsville, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
176 of 182 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not holding 350 F, when cooling the coils did not reheat
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
Parts Used:
-
David from Westford, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
157 of 198 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!