Models
>
KBDS250X4
KBDS250X4 KitchenAid Food Waste Disposer - Overview
Sections of the KBDS250X4
[Viewing 2 of 2]Manuals & Care Guides for KBDS250X4
Click to downloadInstall
Installation Instructions
(1.2MB)
Manual
Owner's Manuals
(1.2MB)
Specs
Product Specifications Sheet
(0.02MB)
Keep searches simple, eg. "belt" or "pump".
Gasket
PartSelect #: PS357403
Manufacturer #: 4211344
Also known as a tailpipe gasket.
No Longer Available
Questions And Answers for KBDS250X4
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kevin
July 25, 2021
Our garbage disposal stopped working. It is not jammed. I put the tool in the bottom and it moves freely. The power is on. The breaking is on. I pushed the red button on bottom. Still not working
For model number KBDS250X4
Hi Kevin,
Thank you for your question. If your garbage disposal stopped working, there are some parts that you will need to check to see which one is causing the issue. You will need to check start switch and the disposal stopper. We hope this helps! Good luck with the repair!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Common Symptoms of the KBDS250X4
[Viewing 2 of 2]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Leak around discharge pipe
Was amazed the gasket was delivered the day after I ordered it! Removed old gasket and cleaned out what I thought was accumulated waste. Replaced gasket and ran water, had a flood. What I had removed was rusted part of appliance. Unable to repair and ended up replacing the garbage disposal. Bad Luck.
Parts Used:
-
Richard from Freeport, ME
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench set
11 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switch was clogged with food
I need to put rubber washer and internal nut to retain the switch in place and the cover switch doesn't retain the screw ( this was passing through without retain the cover )
Parts Used:
-
Alvaro from Norwalk, CT
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
worn out gasket
-
George E. from Marysville, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!