Models
>
MDB4949SHZ0
MDB4949SHZ0 Whirlpool Dishwasher - Overview
Sections of the MDB4949SHZ0
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Lower Dishrack Wheel
PartSelect #: PS3406971
Manufacturer #: W10195416
This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult....
$58.53
On Order
Power Cord Kit
PartSelect #: PS358548
Manufacturer #: 4317824
Includes power cord and all necessary parts needed for complete installation of cord.
$34.15
In Stock
Side Mounting Bracket Kit
PartSelect #: PS1487167
Manufacturer #: 8212560
This mounting kit can be used on solid surface countertops.
$23.81
In Stock
Door Handle - Stainless Steel
PartSelect #: PS3418030
Manufacturer #: W10195738A
Screws are included.
$61.18
In Stock
Questions And Answers for MDB4949SHZ0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the MDB4949SHZ0
[Viewing 7 of 7]Leaking
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken wheel unit on the bottom dish rack
All you do is pop out the old wheel unit at two (2) points on the plastic wheel housing and pop in the new one. Easy fix. Less than a 5 minute fix.
Parts Used:
-
Thomas from WEST OLIVE, MI
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
92 of 106 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheel on lower shelf broke off
Simply snap the old one off and snap the new one on. Simple as that less than 15 seconds.
Parts Used:
-
Dennis from OAKWOOD, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
30 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher door leaking
First off, this part does not look like a seal. It seems more like a trim piece. It is the only part along the bottom of the DW door so it is indeed a seal, and the DW was leaking after I replaced the seal around the tub and the door. First take off the inner panel of the door by removing the Torx screws on the edge and the hinges. Pay attention to which hole each screw came out because they are different lengths. Gently separate the inner panel being careful with the wires going to the detergent dispenser. The seal is held on by 5 small hex head screws on the bottom of the door panel. Remove the old one and install the new one. Put the door panel back together and on the hinges. Good luck.
Parts Used:
-
Paul from HGHLNDS RANCH, CO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
21 of 21 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!