![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Keypad - Black
$245.75
Special Order
PartSelect Number
PS1018574
Manufacturer Part Number
WD34X11158
Manufactured by
GE
Product Description
Keypad - Black Specifications
Also known as overlay or touchpad.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD34X11158 replaces these:
AP3868891, 1168420
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Front gasket leak, jets clogged, keypad shorted out
Based on parts select diagrams, I removed the sprayer arms and replaced them along with new washers/bushings.
I simply pulled the front gasket out
I simply pulled the front gasket out
Other Parts Used:
-
Robert from Sacramento, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
8 of 56 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Touch panel was not operating
Turned off power to the dishwasher. Used Lock out Tag Out Protocol.
Removed the inside Stainless panel of dishwasher. followed the wiring from the keypad to the internal board. Disconnected the wiring to the board. Removed the keypad and wiring from board. installed new keypad assembly connecting to the internal board and then affixing the new keypad assembly to the top of the dishwasher door assembly.
Removed the inside Stainless panel of dishwasher. followed the wiring from the keypad to the internal board. Disconnected the wiring to the board. Removed the keypad and wiring from board. installed new keypad assembly connecting to the internal board and then affixing the new keypad assembly to the top of the dishwasher door assembly.
Other Parts Used:
-
Robert from ORLANDO, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
November 20, 2017
How do I change the touchpad? I can't find instructions
For model number PDW9980N00SS
Hi Michael, Thank you for the question. First unplug the appliance from its power source.Next remove the inner door panel. Then you can access the ribbon cable for the touch pad. Disconnect the ribbon cable from the board and remove the board from the panel. Now peel the old keypad and install the new one in reverse order. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1018574
Manufacturer Part Number: WD34X11158
Manufacturer Part Number: WD34X11158
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)