![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Refrigerator Dispenser Actuator Pad
$31.01
Special Order
PartSelect Number
PS11749415
Manufacturer Part Number
WPW10168729
Manufactured by
Whirlpool
Product Description
Refrigerator Dispenser Actuator Pad Specifications
The dispenser actuator pad attaches to the refrigerator dispenser housing and activates the dispenser.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not dispensing water
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, Kenmore.
Part# WPW10168729 replaces these:
AP6016131, W10168729
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dispenser actuator lever would not spring back to stop water flow or ice delivery.
Unplug refrigerator. Lift and remove cup tray, exposing the two screws. Remove both. Gently pry the plastic bezel/cover from the door facing. Remove the three screws securing the black dispenser/circuit board assembly. Carefully disconnect the three cables from the circuit board (remember how they were routed). Being careful not to lose the spring clip, remove the defective actuator. Place the spring clip on the new actuator post and reattach actuator to the black housing making sure to hook the rear spring clip hook into the hole behind it. Using pliers, pull the front spring clip hook up so that it catches on the assembly post. While the dispenser assembly is off, good time to clean up any dirt, grime, etc from the assembly and door facing. Replace the assembly by reconnecting the three cables and using the three screws. Carefully snap bezel/cover in place and secure with the two screws. Replace cup tray.
Other Parts Used:
-
Dave from N TOPSAIL BCH, NC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749415
Manufacturer Part Number: WPW10168729
Manufacturer Part Number: WPW10168729
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)