Part Location Diagram of WH13X10027 GE Triple Water Inlet Valve
See part 805 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Triple Water Inlet Valve

$141.10
  Special Order
PartSelect Number PS1482391
Manufacturer Part Number WH13X10027
Manufactured by GE
Product Description

Triple Water Inlet Valve Specifications

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | No hot or cold water
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH13X10027 replaces these:
AP3995139, 1264511
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.0 / 5.0, 6 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Water was very slow filling and relay hummed loudly.
Disconnected electrical power plug and two water inlet hoses Removed three screws holding control panel to back panel. Slid control panel sideways then tilted forward to expose inlet valve. Removed the two clip wiring connections and two hold down screws. Compressed the spring clip on the outlet hose and slid it off the valve. Installed the new valve in reverse order. Reinstalled the control panel and three attachment screws. Reconnected the water hoses and plugged the electrical cord back in. Started wash cycle to check out. It now fills properly. Problem solved!!
Other Parts Used:
  • John from Mt. Pleasant, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
32 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water keeps running into machine even after it finished the cycle.
Removed the old part put it in the trash, installed the new part. Very easy repair to make.
Other Parts Used:
  • Don from Dahlonega, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
there was no water filling the tub.
unpluged the machine.undo the hoses off the machine took the back plate off to were I could access the triple water inlet took off the two wiring adators,and the hose that was on the triple water inlet then the two phillipshead screws. throw the bad one in the trash.and then put everything back together
Other Parts Used:
  • mike from hampton, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
7 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak from back
Followed instructions that came with part disconnected and connected same steps as disconnection. Piece of cake
Other Parts Used:
  • Kenneth from HOLLIS, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Found that the funnel shower head was crack on the side of head which was letting water leak to inside of the washer
Remove front panel and control panel to get to funnel shower head. Removed mounting screw and hose clamp. Installed new part and reassembled washer.
Other Parts Used:
FUNNEL SHOWER HEAD
  • Mike from SUGAR LAND, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Only had cold water filling the washer
Disconnected the water lines. Removed three screws to remove cover. Removed the two screws holding the water inlet valve and disconnected the power source. Then reconnected the new valve. Process only took twenty minutes.
Other Parts Used:
  • Noah from LIMA, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
January 13, 2018
My machine seems to run fine. The only problem is that there is that the water always continues to drip. It never shuts off completely. I have to turn off the water shut off to stop it from dripping. After the spin dry, if i don't turn off the water the clothes get soaked again. What do you think is wrong?
For model number S3700G0WW
PartSelect logo
Hi Tom, Thank you for your question. It sounds like your water inlet valve needs to be replaced. You can test it with a multi meter before hand to see if it is working correctly, but it seems like perhaps one of the solenoids are stuck open and that is why you are getting that constant dripping. I hope that helps. Good luck with your repair.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Thayne
February 22, 2018
Water keeps running (does not fill,goes out drain for over 30 minutes). I unplugged the washer, and water does not run. Will water inlet valve fix my problem?
For model number WJRR4170G1WW
PartSelect logo
Hello Thayne, thank you for your question. Yes, If the water is not coming into the unit, I would recommend replacing the water inlet valve part number WH13X10027.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Pat
November 18, 2017
Draws full water for wash but draws only 2 slow streams for on right and left of water stream for rinse. Works fine for wash, very, very slow drawing for rinse.
For model number WBSR3140G1WW
PartSelect logo
Hello Pat, Thanks for your question. Your water valve may have a plugged up screen or the line may have low pressure. Remove the cold water fill hose, put the hose in a bucket and check the water pressure. If the pressure is fine, check inside the valve where the water line attaches to. If the screen is dirty, clean it and reattach the hose. Otherwise, you may wish to consider replacing the valve. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Virgil
January 9, 2020
Hot water will not fill. Only small trickle. Checked inlet hose and filter. Both ok. Will triple water inlet valve fix this problem
For model number WJSR4169GOWW
PartSelect logo
Hello Virgil, thank you for your question. Yes, the most likely issue is a bad water valve. We would recommend replacing that part to fix the issue. I hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1482391
Manufacturer Part Number: WH13X10027
Brand
Model Number
Description
General Electric
EWA4600G0WW
Washer - Ge Washing Machine Ewa4600g0ww
General Electric
GBSR3140H1WW
Washer
General Electric
GBSR3140H2WW
Washer
General Electric
GBSR3140H3WW
Washer
General Electric
GBSR3140H4WW
Washer
General Electric
GBSR3140H5WW
Washer
General Electric
GBSR3140H6WW
Washer
General Electric
GBSR3140H7WW
Washer
General Electric
GBSR3140H8WW
Washer
General Electric
GHDSR316H0WW
Washer
General Electric
GHDSR316H1WW
Washer
General Electric
GHDSR316H2WW
Washer
General Electric
GHDSR316H3WW
Washer
General Electric
GHDSR316H4WW
Washer
General Electric
GHDSR316H5WW
Washer
General Electric
GHDSR316H6WW
Washer
General Electric
GHDSR316H7WW
Washer
General Electric
GHDSR316H8WW
Washer
General Electric
GJRR4170H0WW
Washer
General Electric
GJRR4170H1WW
Washer
General Electric
GJRR4170H2WW
Washer
General Electric
GJRR4170H3WW
Washer
General Electric
GJRR4170H4WW
Washer
General Electric
GJRR4170H5WW
Washer
General Electric
GJRR4170H6WW
Washer
General Electric
GJSR4160H0WW
Washer
General Electric
GJSR4160H1WW
Washer
General Electric
GJSR4160H2WW
Washer
General Electric
GJSR4160H3WW
Washer
General Electric
GJSR4160H4WW
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service