Part Location Diagram of WE4M519 GE Rotary Start Switch
See part 35 in the diagram
Replacing your General Electric Dryer Rotary Start Switch
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Rotary Start Switch

★★★★★
★★★★★
5 Reviews
$42.65
  Special Order
PartSelect Number PS3487203
Manufacturer Part Number WE4M519
Manufactured by GE
Product Description

Rotary Start Switch Specifications

This part is used to start the dryer once you have selected a setting on the timer. The terminal locations on the new switch may be different, match up terminal numbers from old switch to new.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Dryer Rotary Start Switch

Replacing your General Electric Dryer Rotary Start Switch
Troubleshooting
This part fixes the following symptoms:
Won’t Start | Will Not Start
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint, Whirlpool.
Part# WE4M519 replaces these:
AP4980910, 1811221, WE4M519, WE4M315, WE4M326, WE4M402
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
4.8
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 60 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Knob would not engage, had to manually turn outer ring to start washer.
Used a screw driver and needle nose pliers to remove clip from behind the timer knob. Took 2 minutes to remove clip, i admit it was a little tricky but once you get a grip on the clip very easily removed. Replaced with new knob, old knob gear was completley stripped . put the new clip on and presto, Like brand new.A normal service call would of ran me 45.00 just to tell me what was wrong with the machine.
Other Parts Used:
Compression Ring Timer Knob with Clip Timer Knob Clip
  • Mr Dennis from Twinsburg, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
230 of 270 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All the control knobs broke
I took apart the top of the dryer and removed the switch and replaced it with the new one. I also removed the knobs and replaced them. Easy
Other Parts Used:
Timer Knob D-Shaped Knob Clip
  • Douglas from Santa Barbara, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
113 of 198 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Start switch was stuck in the on position always leaving dryer running until you moved timer switch to off or opened door
Just removed the screws at the top of the control panel cover and flipped it down. The switch was then in plain view and simply slid out ( after taking off knob)..placed wire terminals on new switch as I took them off old switch. Slid new switch back in place to lock it in then put control panel cover back into place and replaced screws. Your good to go.
Other Parts Used:
  • Stan from Yorkville, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
85 of 100 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer wouldn't run at all
First I figured out it was the start switch, I heard it make an electrical zap noise when I turned it and then the dryer didn't start. Once I had the part I simply removed the back from the dryer with a screwdriver (5 phillips head screws and 1 flat head). Then I twisted the old switch and it popped right out. Then I unhooked the wires and rehooked them to the new switch. Then I twisted the new switch into place, tested the dryer - IT WORKED! After that I just replaced the back cover and I was done. It was so quick! I am a 25 year old single mother with a 21 month and 4 month old. If I can do it on my own anyone can!
Other Parts Used:
  • Julie from Delmar, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
40 of 44 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic attachment which turns dryer on worn and knob was stripped
Use snub nose plier took less than fifteen minutes.
Other Parts Used:
Control Knob and Clip - White
  • Cynthia A from Philadelphia, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
27 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob on washer timer would not turn dial also dryer start switch would not work.
Washer - remove 4 screws (phillips)on the back of the panel, slide it sidways slightly and pull forward to release. remove clip behind knob ( kinda like the clip on old car window handles) remove knob and dial. remove 1 nut on timer, rotate timer to release. installation is just as easy, but put clip onto knob first then just push onto dial shaft, it will click when on correct.

Dryer - remove 4 screws (phillips) on back of panel and remove same as washer. dryer switch will have a little cam lock on it just pull it off the plastic retainer and rotate switch. Remove wires one at a time and put on new switch so as not to wire wrong. reverse for re-assembly
Other Parts Used:
Knob and Clip
  • richard from shreveport, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
17 of 34 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing machine overflows on "Cold water" setting
Repair was simple. Initially thought the problem was the Water Level pressure swith, but since water overflow was only happening when selecting cold wash & during the rinse cycle (Always cold water) the Dual Valve Selenoid replacement FIXED the problem. Took 5 minutes to replace.
Other Parts Used:
Water Pressure Switch Hose Water Level Pressure Switch
  • Robert from Riverview, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
16 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not stay off after door was opened and closed. Normally you have to hit the start switch again.
Unscrewed three screws on back and removed the switch and inserted the new one. There are 3 wires that clamp on the switch. Remember to unplug before doing this.

Real easy and great people to work with. Much cheaper than a technician repair.

Jim
Other Parts Used:
  • James from Apopka, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not start
I narrowed the porblem down to the rotary start switch, which is located in the top panel. It takes a hex wrench to remove the four screws holding the fron top panel in place and of course the knobs had to be removed. The switch rotates about a wuarter of a turn to come out. Label and remove the three connectors (3). It took about a week to get the replacement part which was slightly different than the original part. The good thing is it had the three prongs like the old part.. I hooked the connectors in the same configuration as the old switch, plugged the power cord back in to test and it started right up.
Other Parts Used:
  • Jimmy from American Canyon, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic knob was worn nd this in turn broke the switch.
removed the facia and removed the switch
Other Parts Used:
Control Knob and Clip - White
  • Peter from Orlando, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
11 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

37 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jeremiah
September 15, 2017
I am replacing the rotary switch but I can only find two wires. The double red that comes from the timer and another that comes from the cycle select. Where is that third wire supposed to come from?
For model number DHDSR46GG1WW
PartSelect logo
Hi Jeremiah, Thank you for the question. Here is a video on how to replace this switch. It should be helpful with locating the wires. https://www.youtube.com/watch?v=m9lGqnfwLh4 Hope this helps!

17 people found this helpful.

Was this helpful?
Thank you for voting!
Kenneth
April 14, 2018
I need the panel that the switches snap into but i don't seem to be able to find it on your site the tab has broken off so it won't hold the start switch
For model number Model DBXR463EG0WW
PartSelect logo
Hello Kenneth, Thank you for your inquiry. We're showing that they snap into the plastic tabs on the inner part of the backsplash-part# WE19M1490-white, or part# WE19M1491-bisque. Hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Gasman
May 5, 2018
When i try to start the dryer you here the dryer turn on for 1 second.When i let go of the start dial the dryer turns off.For that one second the tumbler does not turn
For model number dbxr463gd3ww
PartSelect logo
Hello Gasman, thank you for your question. There are a few parts you will want to check first. The Drive Belt Part Number: WE12M29, and the Idler Pulley Wheel Part Number: WE12X83 that the belt rides on, as well as the Rotary Start Switch Part Number: WE4M519, Interlock Switch Part Number: WD21X10261 as well as the Door Switch Part Number: WE4M415. These parts can be tested with a multimeter to determine if they are bad. I hope this helps!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Susan
November 13, 2018
When i turn the rotary start knob on my dryer it starts but once it is released it stops. Do you think the knob is the problem or is it likely something else??
For model number DWSR483EG3WW
PartSelect logo
Hello Susan, Thank you for the question. The knob is just used to give you something to hold and grip. It sounds like an issue with the switch behind the knob. Part Number: PS3487203. Hope this helps, good luck with this repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
February 21, 2018
I changed the switch but the dryer will not keep running unless you hold the switch to the start position
For model number Gtdx200gm1ww
PartSelect logo
Hi Robert, Thank you for the question. This would be an issue with the switch on the motor. The switch is not sold separate from the motor so the motor will need to be replaced, PartSelect Number PS11699355. Hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Nancy
October 14, 2017
Will this work on Hotpoint dryer
For model number dbxr463ed2ww
PartSelect logo
Hello Nancy, thank you for contacting us. Based on the model number provided this would be the correct start switch. Good luck with the repair!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Nikki
August 26, 2017
Okay so i purchased the rotary start switch and as i tried to remove the 3rd wire i see that there is some sort of Green rust on it that's making it hard to remove from the defective rotary switch. What is that Green rust that is on the electric wire?
For model number DBSR463EG1WW
PartSelect logo
Hello Nikki, thank you for contacting us. That green rust would be corrosion. Over time that can build up, you can get some spray to remove and clean it. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Thomas
January 4, 2019
Can I check this part by using a hand held multi-meter, not sure what needs replacement??
PartSelect logo
Hello Thomas, Thank you for the question. Yes, you can test with a multi meter to check for continuity. Hope this helps, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Jim
June 28, 2019
Is there a way to 'test' the start switch? I was thinking i could bypass with a quick touch of hot wires to see if the dryer motor starts. Your thoughts please.
For model number DBSR463EG7WW
PartSelect logo
Hello Jim, Thank you for the question. Yes, you can test with a multi meter to check for continuity. Hope this helps, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
David
January 28, 2019
This switch i received from you {# we4m619 } has 3 electical post and my switch has 2 post . I have 2 two brown wires on one spade and a 1 wire on another. This one you sent me has 3 elec. Post i only have but only two hook ups the switch i have is normaly open the one i got from you i don't think it is, mine i have to turn to start and it stays engaged on start.
PartSelect logo
Hi David, thank you for your question. We do have an installation video for this part that may help: https://youtu.be/m9lGqnfwLh4. If you do not have a third wire to connect to the switch then you may not have to worry about that. Install the wires that you do have on the same terminals as your old one and it should work. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3487203
Manufacturer Part Number: WE4M519
Brand
Model Number
Description
General Electric
662311
Dryer
General Electric
662412
Dryer
General Electric
664110
Dryer
General Electric
664210
Dryer
General Electric
664211
Dryer
General Electric
672412
Dryer
General Electric
672512
Dryer
General Electric
672712
Dryer
General Electric
672812
Dryer
General Electric
674310
Dryer
General Electric
674311
Dryer
General Electric
674410
Dryer
General Electric
674411
Dryer
General Electric
674412
Dryer
General Electric
674810
Dryer
General Electric
674811
Dryer
General Electric
674910
Dryer
General Electric
677310
Dryer
General Electric
677311
Dryer
General Electric
677312
Dryer
General Electric
677313
Dryer
General Electric
677314
Dryer
General Electric
677315
Dryer
General Electric
677317
Dryer
General Electric
BBXR473EH0WW
Dryer
General Electric
BBXR473EH1WW
Dryer
General Electric
BBXR473EH5WW
Dryer
General Electric
BBXR473EH6WW
Dryer
General Electric
DBB5000EF0GG
Dryer - Electric
General Electric
DBB5000GF0GG
Dryer - Gas
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service