Part Location Diagram of 215267701 Frigidaire Door Shelf End Cap - Left or Right Side
See part 5 in the diagram
Replacing your Frigidaire Refrigerator Door Shelf End Cap - Left or Right Side
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Door Shelf End Cap - Left or Right Side

★★★★★
★★★★★
7 Reviews
$6.68
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS422444
Manufacturer Part Number 215267701
Manufactured by Frigidaire
Product Description

Door Shelf End Cap - Left or Right Side Specifications

This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Refrigerator Door Shelf End Cap - Left or Right Side

Replacing your Frigidaire Refrigerator Door Shelf End Cap - Left or Right Side
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Uni.
Part# 215267701 replaces these:
AP2110843, 444
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
5.0
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 11 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Freezer / refrigerator warm (not defrosting)
I checked the defrost timer (bottom front of the freezer / outside). I advanced it to send it into the defrost cycle. The heating elements in the freezer (behind the panel) did not heat up. I cut the wires going to the defrost thermostat. Turned the power back on, made sure the defrost timer was still in the defrost cycle and checked the voltage at the wires to the defrost thermostat (before the heating elements). There was power / voltage there. I jumped out / bypassed the defrost thermostat turned the power back on and the heating elements came on. The problem was the defrost thermostat. So I replaced it with a new one from PartSelect.com. How it works...
When the defrost timer is advanced to the defrost cycle the switch closes sending power to the defrost thermostat. If the temperature is low enough, the defrost thermostat switch will close and sends power to the heating elements. When the temperature rises high enough about 55 degrees the switch at the thermostat will open and the heating elements will turn off (not allowing the freezer temperature to get too high, just enough to defrost the coil). The refrigerator will turn back on when the timer advances. The defrost timer will defrost every 8-12 hours.
Other Parts Used:
Defrost Thermostat Refrigerator Knob Door Shelf Retainer Bar - Cut to Fit CHUTE-ICE
  • David from Fleetwood, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
33 of 45 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My electric bill was super high. $450 for 1 month for a 1bdrm apt in NY city
I took a look at the web site where I purchased the parts, then I took a look at the paper enclosed with the order. Thankfully, I have a battery operated screw driver since there are so many screws. There are plenty of screws in my refrigerator and freezer doors. I thought that since my old door gaskets were all chewed up looking, if I changed them, the 10 year old air conditioners and the old fashioned light bulbs to instant on energy saver light bulbs, the electric bill would become more manageable.

The refrigerator and freezer door gaskets were the first step. They were easy to swap out. You just need to empty the door of all food items, then pull back the old gasket to see the screws. There are alot of them. You should leave 2 loosened screws on each side of the refrigerator door to hold the panel in place while you work and remove the rest. Then you can remove the old gasket and slide the new one into place. Make sure as you tighten the screws and replace the ones you removed, the new gasket fits into the door panel groove securely and is in place as you tighen the screws. Make sure it is in place all the way around the door as you work. You repeat the procedure for the freezer using only one loosened screw on each side to keep the interior panel in place while you work. It takes some time due to the number of screws, but the work is pretty easy. I never even broke a nail.

The end caps for the shelf bars just snap into place just as the old ones can be snapped out with a bit of pressure. They do not have to be wrestled and you need to work carefully so that you do not break them. (I ordered an extra just in case, but I didn't need it. I will have it in case I need it in the future)

My electric bill dropped from $450 to $110 a month with all the improvements I made. Thank you Part Select for taking the fear of screwing it up, out of the repair process and making it manageable. I can afford my electric bill now. Thanks for your help.
Other Parts Used:
Freezer Door Gasket Fresh Food Door Gasket Door Shelf End Cap - Left or Right Side Door Shelf Retainer Bar - Cut to Fit
  • Lynn from New York,, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
19 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken end caps
The end caps worked perfectly for both the Frigidaire and Westinghouse fridges. Just pulled out the old end caps and then literally just pushed in the new ones (remember to attach the shelf bar before attaching the second end cap!). The pieces arrived quicker than expected. Thanks Partselect!
Other Parts Used:
Door Shelf End Cap - Left or Right Side
  • Nana from Blaine, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced door racks
Placed door rack in end caps and snapped on to door
Other Parts Used:
Door Shelf Retainer Bar - Cut to Fit Door Shelf End Cap - Left or Right Side
  • Yvonne from Sayre, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
end piece broken that held bar on freezer door shelf
attached the bar to the end piece and slipped it into the proper opening. Easy I ordered the piece one morning and received it the next morning. Great service.
Other Parts Used:
  • Betty from Seal Beach, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door brackets were broke off refridgerator
Put the end caps on the metal bar and put it on the freezer door and it snapped right in.

Very easy to do in less then 4 minutes to do both shelves.

Thank you very much.
Other Parts Used:
  • Tonda from Holland, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door shelf ends broken off from constant pulling on door and slaming it with 2 gallons of milk in door.
Inserted the caps into the bar and snapped in door. That's it.
No tools needed! Hope it last another 20 years
Other Parts Used:
  • Katherine from Lafayette, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Shelf end had broke and the top shelf would not hold food
order the part and when it came in I installed it into the door at the same time fitting the front guard and then snapping it into place. 5 minutes or less
Other Parts Used:
Door Shelf End Cap Set - Left and Right Side
  • James from Dallas, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door shelf end caps were broken
removed broken end caps, took a small screwdriver and simply applied a little pressure to release them. Pushed new end caps into place (they just snap in). Presto done!!
Other Parts Used:
Door Shelf End Cap - Left or Right Side
  • Lupe from Las Cruces, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door end cap broken,
Put the new ordered door end caps in place, everything worked fine.
Other Parts Used:
  • Edward from Piscataway, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carrey
January 24, 2022
Can’t tell whether I need PS 422925 or PS 422444 for shelf retainer end caps. They look the same. I’ll need both sides.
For model number 25378137891
PartSelect logo
Hi Carrey, Thank you for your question. The part number listed under your model number for the freezer door end cap left or right side is PS422925. The part number listed for the refrigerator door end cap left or right side is PS422444. They are sold individually. If you would like to place an order for them, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS422444
Manufacturer Part Number: 215267701
Brand
Model Number
Description
Kenmore
25336600890
Refrigerator
Kenmore
25336600891
Refrigerator
Kenmore
25336600892
Refrigerator
Kenmore
25336600894
Refrigerator
Kenmore
25336600895
Refrigerator
Kenmore
25336600896
Refrigerator
Kenmore
25336600898
Refrigerator
Kenmore
25336601890
Refrigerator
Kenmore
25336601891
Refrigerator
Kenmore
25336601892
Refrigerator
Kenmore
25336601894
Refrigerator
Kenmore
25336601895
Refrigerator
Kenmore
25336601896
Refrigerator
Kenmore
25336601898
Refrigerator
Kenmore
25336608890
Refrigerator
Kenmore
25336608891
Refrigerator
Kenmore
25336608892
Refrigerator
Kenmore
25336608894
Refrigerator
Kenmore
25336608895
Refrigerator
Kenmore
25336608896
Refrigerator
Kenmore
25336608898
Refrigerator
Kenmore
25336609890
Refrigerator
Kenmore
25336609891
Refrigerator
Kenmore
25336609892
Refrigerator
Kenmore
25336609894
Refrigerator
Kenmore
25336609895
Refrigerator
Kenmore
25336609896
Refrigerator
Kenmore
25336609898
Refrigerator
Kenmore
25336610890
Refrigerator
Kenmore
25336610891
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service