Part Location Diagram of 5304404821 Frigidaire Temperature Control Thermostat
See part 21 in the diagram
Replacing your Frigidaire Refrigerator Temperature Control Thermostat
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Temperature Control Thermostat

★★★★★
★★★★★
1 Review
$163.29
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS470790
Manufacturer Part Number 5304404821
Manufactured by Frigidaire
Product Description

Temperature Control Thermostat Specifications

This part helps maintain a constant temperature within the appliance.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Frigidaire Refrigerator Temperature Control Thermostat

Replacing your Frigidaire Refrigerator Temperature Control Thermostat
Troubleshooting
This part fixes the following symptoms:
Fridge too cold | Fridge runs too long | Fridge too warm
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Kenmore, Gibson, Uni.
Part# 5304404821 replaces these:
AP2150703, 638759, 5303321453, 5303323457, 5304401169, 5304403736, 5304404260, 5304404821
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 7 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
refrigerator run won;t shut off
verifed temp cntrol by putting element in ice bath removed box and replaced both time and control
Other Parts Used:
Defrost Timer - 60Hz 120V
  • Ronald from Bridgeport, CT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
40 of 61 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator won't cycle up
There are 3 parts that actually control cooling cycle: Temperature Thermostat, Defrost Timer and sensor/relay on the back side of the appliance. If fridge cycles up after you turn small knob on defrost time (you'll hear click, problem lies between first two components.
Replacing them is really easy. Make sure you handle thermostat wire carefully. Check for connectors holding firm.
Use schematic diagrams you may find at this site.

Good luck.
Other Parts Used:
Defrost Timer - 60Hz 120V
  • Branislav from Denver, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
19 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thermostat Control contacts burnt up
The Roper part was no longer available and a substitute was not recommended. But because of the excellant descriptions and photos on Part Select I was able to find a Fridgedaire part that looked exactly like the one I needed to replace. I it fit perfectly... I am impressed and have bookmarked your site for later purchases.
The thermostat is located at the top of the refridgerator compartmennt under the freezer. Remove light bulb to access the screw at the back of the thermostat/defrost timer housing. Remove screw and slide the assembly to the back to release the 2 tabs holding the front. Remove the temperature control knob on the thermostat, remove the 3 wires connected to the thermostat noting where which wire goes for re-assembly. Using a philips #2 screwdriver, remove the 2 screws under the temperature control knob and remove the thermostat. Do not lose the screws, the new thermostat does not have mounting hardware. Piece of cake, Ice cream cake if you get the freezer working again.
Other Parts Used:
  • Marvin from Underwood, ND
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
15 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator was constantly running and freezing
I removed the screw holding the assembly to the roof of the refrigerator and pulled it dow. I took out the two screws holding the Temp control, removed the three wires and reversed the process to reassemble. Works great now!
Other Parts Used:
  • Daniel from Rancho Cordova, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
15 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge Will Not Start
Tapping on the thermostat control would start the compressor, but after cycle was complete it would not start again on it's own. Seemed like a slam-dunk that the control contacts were worn out. PS had the right part in stock, and it arrived quickly. Nearly identical to the original part, it installed without any problems. One minor glitch, though - the mounting tabs are tapped for #6 screws, but the original screws were #4. Since no hardware was included, I had to dig up larger screws to make it work. Not a big deal at all - but it would be handy to include these screws. Works just like the original, maintains inside temp just fine. A no-brainer for 65 bucks. This fridge is 15+ years old, and now serves as a beer cave. Cold beers for everyone!
Other Parts Used:
  • John W from Gaylord, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator keeps running only turns off very seldomly
Problems. Two screws holding temperature control module to the plastic case did not fit the holes in temperature controler were too big. So I used gorilla glue to help secure but it was still loose a little bit with all the connections made i turned it on but it did not work
Other Parts Used:
  • Scott from Canton, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not heat , only cold air
After realizing the engineering on this dryer was different, I was able to access the temperature control thermostat through the front, along the side of the heating element. Several philips screws hold the front on, removing them allows you to take front panel off. At that point the heating element is below. I took a picture of the wires, so that when I started removing them, it would be easy to reconnect. Two screws hold the heating element in place, upon removing the heating element housing pulls gently forward and out, be careful of the wires, the thermostat is the second thing connected to the housing of the heating element. Two more philips screws hold the housing to the bottom of the dryer. Two wires are removed from thermostat, which is also held in place by two philips screws. Remove wires, one at a time and place on thermostat exactly as they were on old thermostat. Hold new thermostat in place with the two Philip screws, and reassemble in reverse order. And enjoy your working dryer once more, hopefully for years to come.
Other Parts Used:
  • Joseph from BUFORD, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
December 15, 2021
need a temperature controller thermostat, for Frigidaire refrigerator model #ffhs26119f7
For model number FFHS2611PF7
PartSelect logo
Hi Mary, Thank you for your question. The temperature for your refrigerator is controlled by an electronic control board located inside the refrigerator. The part number listed under your model number for the electronic control board is PS10060580. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS470790
Manufacturer Part Number: 5304404821
Brand
Model Number
Description
Kenmore
25336600890
Refrigerator
Kenmore
25336600891
Refrigerator
Kenmore
25336600892
Refrigerator
Kenmore
25336600894
Refrigerator
Kenmore
25336600895
Refrigerator
Kenmore
25336600896
Refrigerator
Kenmore
25336600898
Refrigerator
Kenmore
25336601890
Refrigerator
Kenmore
25336601891
Refrigerator
Kenmore
25336601892
Refrigerator
Kenmore
25336601894
Refrigerator
Kenmore
25336601895
Refrigerator
Kenmore
25336601896
Refrigerator
Kenmore
25336601898
Refrigerator
Kenmore
25336608890
Refrigerator
Kenmore
25336608891
Refrigerator
Kenmore
25336608892
Refrigerator
Kenmore
25336608894
Refrigerator
Kenmore
25336608895
Refrigerator
Kenmore
25336608896
Refrigerator
Kenmore
25336608898
Refrigerator
Kenmore
25336609890
Refrigerator
Kenmore
25336609891
Refrigerator
Kenmore
25336609892
Refrigerator
Kenmore
25336609894
Refrigerator
Kenmore
25336609895
Refrigerator
Kenmore
25336609896
Refrigerator
Kenmore
25336609898
Refrigerator
Kenmore
25336610890
Refrigerator
Kenmore
25336610891
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service